Friday, December 21, 2007
Which Dvds Are Most Common
Congratulations to those who need it, to those who lonely, to those who want peace, e. .. to the whole world !!!!!!!!!
Sunday, December 9, 2007
The Best Of Denise Milani
40/80
As I announced I wanted to test the interface microHAM microKEYER II and 'so what better opportunity to participate in the contest 40/80 italiano.decido eclusivamente 40/80 single operator in the category Digital (RTTY, PSK31) .
Given that no one who is very passionate for the Saturday contest for various reasons I prepare with holy patience adapting prg. IK3QAR of the needs of microHAM to be more 'clear this interface uses a "USB Device Router" which basically handles all the USB ports in a virtual accordingly by this panel is set by the various ports for various applications, FSK, CW, Winkey, DVK, etc. ..
I immediately noticed a real lack of propagation of the south came with difficulty 'in central and northern way just enough so that I suffered an idea that was useless in those conditions do not change much through the night in my opinion the result.
19.oo o'clock in a good 80 hours allows me to do some 'multipliers but even then they' ran out stations were participating in a few to call so I decide to resume Sunday morning.
Sunday the music does not change in 40 is that few openings in 80 series sin I would more willingly 'but this time do more' was difficult. The
microKEYER II 'was great never once an error in perfect condition hardly used with Icom 756 Proia and 'a perfect combination.
Two notes are to be referred
Sorry OM detect the bad habit of calling a correspondent on the frequency occupied by another station contest, can not stand it I do not know if all you think if a clever and often 'busy for hours can be seen iso often call the station just not connected to make the effort to call or consume watts .. be incorrect, please!!
often known to call two, three, four times a station already 'connected if you use your program to properly contest tells you if you have a duplicate' do not waste time corresponding to the station. However
positive experience we hope to test this out next year.
Given that no one who is very passionate for the Saturday contest for various reasons I prepare with holy patience adapting prg. IK3QAR of the needs of microHAM to be more 'clear this interface uses a "USB Device Router" which basically handles all the USB ports in a virtual accordingly by this panel is set by the various ports for various applications, FSK, CW, Winkey, DVK, etc. ..
I immediately noticed a real lack of propagation of the south came with difficulty 'in central and northern way just enough so that I suffered an idea that was useless in those conditions do not change much through the night in my opinion the result.
19.oo o'clock in a good 80 hours allows me to do some 'multipliers but even then they' ran out stations were participating in a few to call so I decide to resume Sunday morning.
Sunday the music does not change in 40 is that few openings in 80 series sin I would more willingly 'but this time do more' was difficult. The
microKEYER II 'was great never once an error in perfect condition hardly used with Icom 756 Proia and 'a perfect combination.
Two notes are to be referred
Sorry OM detect the bad habit of calling a correspondent on the frequency occupied by another station contest, can not stand it I do not know if all you think if a clever and often 'busy for hours can be seen iso often call the station just not connected to make the effort to call or consume watts .. be incorrect, please!!
often known to call two, three, four times a station already 'connected if you use your program to properly contest tells you if you have a duplicate' do not waste time corresponding to the station. However
positive experience we hope to test this out next year.
Monday, December 3, 2007
Savable Pokemon Red Online
Micro Keyer II by microHAM
Saturday I finally got this beautiful interface microHAM imported from Italy Cubicom of Trento.Devo a premise I do not know if I'll be able 'to give all info possible because it' s a real monster of efficiency in person after 2 days of testing I have not found a single shortcoming
The real news' and 'one optimized for the integrated soundblaster' specific use of various digital modes.
Other news' is a complete serial interface that makes every maneuver change frequency, mode, filter in full harmony with the TxRx (in this case with an Icom Pro III). I would add that even has a CI-V output for interfacing an additional other application such as in my case the working fluid of the steppe.
After installing the software with a "USB Device Router" (updates itself via internet both software and firmware residing in the machine) that handles virtually everything from the USB port, adjustment of sound levels, the Winkey resident in the car, in short everything you want even a chance 'to customize the message on the screen. So
tests were performed with the Prg. Dxlab that in this case, and 'found perfect .. its control module "commander" replied immediately giving me a chance' to gain immediate access to every command possibile.Il prg Winwarbler gave his best in any particular mode not be overlooked in cw with Winkey and 'was the best.
There are many news 'such as the operating frequency and the law' using a table resident is ready for voice PSK or RTTY etc ... any info on the display even the possible input voltage. Comodo
the voice part with the predisposition to various pre-recorded messages ..!
All functions can be saved either with a button in the custom menu with a backup in any info .. display all transactions in CW and RTTY and voice are visible and I forgot ... 'you can connect a ps2 keyboard port to communicate directly without going via the computer.
For now I'll stop here but I think I'll soon be 'longer after a few more days' of experience and evidence.
So for now I'll stop here but I decided to enter the contest 40 and 80 m on Saturday and Sunday 8 / 9 December for the field tests.
the next episode to complete the information on this wonderful interface.
73's Luigi
------------------------------------------- --------------------------------------------
Specifications:
USB: USB 2.0 Full speed , USB 1.1 compatible
Power consumption:
USB: up to 100mA
External: 400 mA (16 V max)
Radio Port: RXD, TXD, (RTS, CTS) max. 57600Bd
- levels: TTL, inverted TTL, open collector bus, RS232
Aux Port: TTL RxD, TxD - 9600 baud maximum
CI-V Port: open collector bus - 9600 baud
CW: open collector, max 30V/400mA
FSK: open collector, max 30V/400mA
- supported 5/6/7/8bit data length, 1/1.5/2 stop bit, up to 300 Bd
PTT1: open collector, max 30V/100mA
PTT2: open collector, max 30V/400mA
PA PTT: selectable by rear panel switch
- open collector, max. 48V/1.5A
- relay contact, max. 125VAC/2A 60VDC/2A
LNA PTT: selectable by rear panel switch
- open collector, max. 48V/1.5A
- relay contact, max. 125VAC/2A 60VDC/2A
Foot Switch: input, active when closed to ground, max. 5 mA
Audio Out:
- single channel (left)
- output impedance:600 Ohm
- output level: 4V p-p (max)
- AC coupled
- 3dB bandwidth: 0.2 - 6KHz typical
Audio In:
- dual channel (stereo)
- input impedance: 50k Ohm
- input level: 4V p-p (max)
- AC coupled
- 3dB bandwidth: 0.2 - 6KHz typical
Dimensions: 232mm W (9125) H x 44mm (1.73 ") x 105mm D (4125)
Weight: 1300g (1,875 lbs)
The real news' and 'one optimized for the integrated soundblaster' specific use of various digital modes.
Other news' is a complete serial interface that makes every maneuver change frequency, mode, filter in full harmony with the TxRx (in this case with an Icom Pro III). I would add that even has a CI-V output for interfacing an additional other application such as in my case the working fluid of the steppe.
After installing the software with a "USB Device Router" (updates itself via internet both software and firmware residing in the machine) that handles virtually everything from the USB port, adjustment of sound levels, the Winkey resident in the car, in short everything you want even a chance 'to customize the message on the screen. So
tests were performed with the Prg. Dxlab that in this case, and 'found perfect .. its control module "commander" replied immediately giving me a chance' to gain immediate access to every command possibile.Il prg Winwarbler gave his best in any particular mode not be overlooked in cw with Winkey and 'was the best.
There are many news 'such as the operating frequency and the law' using a table resident is ready for voice PSK or RTTY etc ... any info on the display even the possible input voltage. Comodo
the voice part with the predisposition to various pre-recorded messages ..!
All functions can be saved either with a button in the custom menu with a backup in any info .. display all transactions in CW and RTTY and voice are visible and I forgot ... 'you can connect a ps2 keyboard port to communicate directly without going via the computer.
For now I'll stop here but I think I'll soon be 'longer after a few more days' of experience and evidence.
So for now I'll stop here but I decided to enter the contest 40 and 80 m on Saturday and Sunday 8 / 9 December for the field tests.
the next episode to complete the information on this wonderful interface.
73's Luigi
------------------------------------------- --------------------------------------------
Specifications:
USB: USB 2.0 Full speed , USB 1.1 compatible
Power consumption:
USB: up to 100mA
External: 400 mA (16 V max)
Radio Port: RXD, TXD, (RTS, CTS) max. 57600Bd
- levels: TTL, inverted TTL, open collector bus, RS232
Aux Port: TTL RxD, TxD - 9600 baud maximum
CI-V Port: open collector bus - 9600 baud
CW: open collector, max 30V/400mA
FSK: open collector, max 30V/400mA
- supported 5/6/7/8bit data length, 1/1.5/2 stop bit, up to 300 Bd
PTT1: open collector, max 30V/100mA
PTT2: open collector, max 30V/400mA
PA PTT: selectable by rear panel switch
- open collector, max. 48V/1.5A
- relay contact, max. 125VAC/2A 60VDC/2A
LNA PTT: selectable by rear panel switch
- open collector, max. 48V/1.5A
- relay contact, max. 125VAC/2A 60VDC/2A
Foot Switch: input, active when closed to ground, max. 5 mA
Audio Out:
- single channel (left)
- output impedance:600 Ohm
- output level: 4V p-p (max)
- AC coupled
- 3dB bandwidth: 0.2 - 6KHz typical
Audio In:
- dual channel (stereo)
- input impedance: 50k Ohm
- input level: 4V p-p (max)
- AC coupled
- 3dB bandwidth: 0.2 - 6KHz typical
Dimensions: 232mm W (9125) H x 44mm (1.73 ") x 105mm D (4125)
Weight: 1300g (1,875 lbs)
Subscribe to:
Comments (Atom)